Uline H-1131 Guia Del Usuario página 3

1. Open dispenser cover completely.
(See Figure 5)
2. Push a roll of product into the holders and release
when the core becomes engaged. Ensure that the
paper feeds from beneath the roll. (See Figure 8)
Figure 8
1. When the main roll reaches a diameter of
approximately 3" it may be used as a stub roll.
Remove the main roll from the upper roll holders by
pushing it into the dispenser and locking it onto the
lower roll holders. (See Figure 10)
2. Drape paper over the black rubber roller. Load the
main roll as previously described on page 2.
PAGE 3 OF 9
LOADING INSTRUCTIONS
STUB ROLL LOADING INSTRUCTIONS
1-800-295-5510
uline.com
3. Drape the paper over the black rubber roller and
close the cover firmly until it locks. (See Figure 9)
Figure 9
4. Begin dispensing by using the lever.
Figure 10
0721 IH-1131