Tiguan 2009-Up; Kit Assembly; Din Radio Provision With Pocket - Metra 99-9011 Manual Del Usuario

Ocultar thumbs Ver también para 99-9011:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dash Disassembly

Tiguan 2009-up

1. Unclip and remove the passenger
airbag light, and the slotted panel to
the left of the hazard switch. (Figure A)
2. Remove the (2) T-20 Torx screws now
exposed. (Figure B)
3. Unclip and remove the trim panel
surrounding the radio. (Figure C)
4. Remove the (4) T-20 Torx screws
securing the radio, and then unplug
and remove the radio. (Figure D)
Continue to Kit Assembly
PASSENGER
PASSENGER
AIR BAG
AIR BAG
PASSENGER
AIR BAG
(Figure A)
AF
PASSENGER
AIR BAG
(Figure B)
AF
PASSENGER
AIR BAG
(Figure C)
AF
(Figure D)
AF
®
99-9011

DIN radio provision with pocket

1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing and secure by bending the
metal locking tabs down. (Figure A)
3. Slide the radio into the sleeve until
it clicks in. (Figure B)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation.
6. Reassemble the dash in reverse
order of disassembly.
6

Kit Assembly

(Figure A)
(Figure B)
(Figure C)

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido