Descargar Imprimir esta página
Ocultar thumbs Ver también para 99-7345B:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Kia Optima 2011-2013
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black match factory dash
KIT COMPONENTS
• A) Radio Brackets • B) Radio trim panel • C) Pocket • D) (3) #8 x 3/8" Phillips pan head screws
• E) (4) #8 x 3/8" Phillips truss head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Non Amplified System - 70-7304 - Hyundai/Kia 2010-up
• Amplified System - HYBL-04 Hyundai/Kia 2010-up
Antenna Adapter: • Not required
TOOLS REQUIRED
• Panel Removal Tool • Phillips Screwdriver
METRA. The World's best kits.
Installation instructions for part 99-7345B
99-7345B
C
D
metraonline.com
Dash Disassembly ..............................................2-3
Kit Preparation ....................................................... 3
Kit Assembly
– ISO DIN radio provision with pocket ...................... 4
E
CAUTION!
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
Table of Contents
Metra recommends disconnecting the negative bat -
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 99-7345B

  • Página 1 • A) Radio Brackets • B) Radio trim panel • C) Pocket • D) (3) #8 x 3/8” Phillips pan head screws • E) (4) #8 x 3/8” Phillips truss head screws CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle WIRING & ANTENNA CONNECTIONS (sold separately) manufacturer recommends against so.
  • Página 2 99-7345B Dash Disassembly 1. Unsnap and remove the trim from 5. Remove (5) Phillips screws from around the radio and climate the instrument cluster panel, and control. (Figure A) then pull the panel out towards the steering wheel. Unplug all 2.
  • Página 3: Dash Disassembly

    99-7345B Dash Disassembly Kit Preparation 7. Remove (6) Phillips screws 1. Remove (3) Phillips screws securing the radio trim panel and securing the vent on the factory then remove. (Figure G) radio trim panel and then remove. (Figure A) 8. Remove (4) Phillips screws, (2 2.
  • Página 4: Kit Assembly

    Metra recommends using the NOWLEDGE IS OWER proper mating adapter from Metra or AXXESS. Enhance your installation and fabrication skills by enrolling in the most recognized and respected Re-connect the negative battery terminal and mobile electronics school in our industry.
  • Página 5: Características Del Kit

    Instrucciones de instalación para la pieza 99-7345B Indice Kia Optima 2011-2013 99-7345B Desmontaje Dash ..........2-3 Preparación del kit ..........3 Ensamble del kit CARACTERÍSTICAS DEL KIT – Provisión de radio ISO DIN con cavidad ....4 • Provisión de radio ISO DIN con cavidad •...
  • Página 6 99-7345B Desmontaje Dash 1. Suelte a presión y quite de 5. Sacar (5) tornillos Phillips del moldura de cada de todo el control panel del cuadro de instrumentos, de la radio y el clima. (Figura A) y luego tire del panel hacia el volante.
  • Página 7: Preparación Del Kit

    99-7345B Preparación del kit Desmontaje Dash 7. Quite los (6) tornillos de cabeza 1. Quite los (2) tornillos Phillips que Phillips que sujetan el panel de la sujetan el rejilla de ventilación moldura del radio y retire. (Figura G) en el panel de ajuste de radio de fábrica y luego quitar.
  • Página 8: Ensamble Del Kit

    Instrucciones de instalación para la pieza 99-7345B Ensamble del kit IMPORTANTE Provisión de radio ISO DIN con cavidad Si tiene dificultades con la instalación 1. Quite la manga de metal DIN y el anillo de de este producto, llame a nuestra línea moldura del radio de mercado secundario.