Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Hyundai Elantra GT (without NAV) 2013-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted high gloss black
KIT COMPONENTS
• A) Radio housing trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304
Antenna Adapter: • Not required
METRA - The World's best kits
Installation instructions for part 99-7357HG
99-7357HG
C
®
metraonline.com
®
Dash Disassembly ..................................................2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
D
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Table of Contents
All accessories, switches, climate controls panels, and
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 99-7357H6

  • Página 1 Also, do not remove the factory radio with the key in the Antenna Adapter: • Not required on position, or while the vehicle is running. METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION...
  • Página 2: Dash Disassembly

    99-7357HG Dash Disassembly 1. Unsnap and remove the vent panels from either side of the radio down to the shifter base. (Figure A) 2. Remove the (4) screws and remove the radio. (Figure B) Continue to kit assembly (Figure B) (Figure A)
  • Página 3: Kit Assembly

    Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation. 5. Mount the new radio assembly into the dash and reassemble the dash...
  • Página 4: Important

    Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION...
  • Página 5: Hyundai Elantra Gt (Sin Nav) 2013 Y Mas

    Adaptador de antena: • No se requiere con el vehículo funcionando. METRA - The World’s best kits metraonline.com ® © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION...
  • Página 6: Desmontaje Del Tablero

    99-7357HG Desmontaje del tablero 1. Suelte a presión y quite los paneles de las rejillas de cada lado del radio hacia la base de la palanca de velocidades. (Figura A) 2. Quite los (4) tornillos y quite el radio. (Figura B) Continúe con el ensamble del kit (Figura B) (Figura A)
  • Página 7: Ensamble Del Kit

    (Figura C) (Figura A) (Figura B) (Figura C) 4. Localice el arnés de cableado de fábrica en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente.
  • Página 8: Importante

    800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). METRA - The World’s best kits metraonline.com ® © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION...