Classic Accessories Universal SL Snow Thrower Cab Instrucciones Y Cuidado página 5

STEP 2
INSTALL THE CAB FABRIC SHELL ONTO THE FRAME (FIG. 1-4)
Note: Fabric shell will be tight when properly assembled.
PARTS NEEDED
Q
1
Q
Slide the top pocket of the
fabric shell [Q] over the
installed hoop assembly.
3b 3
5
4
3
1
2
Fasten the remaining five
rip-and-grip strips. [Q].
+
2a
Pull down the lower corner of
the shell and slide over the end
of the side frame bars [B].
B
B
3 2b
Then secure the fabric shell
to the frame with the sewn-in
rip-and-grip strips. TIP: When
attaching the rip-and-grip strip,
push the frame up while pulling
the strip around the frame to
increase tension in the shell.
5
TOOLS NEEDED
NONE
2c
Repeat with the other elastic
corner, making sure frame is
secure in elastic pocket.
UNIVERSAL SL SNOW THROWER CAB