DeWalt DE6661 Manual De Instrucciones página 10

E N G L I S H
Installing the planer stand (fig. A & B)
• Open the guard (1).
• Place the planer on the stand.
• Mount the bolt (5) and washer (6) and tighten the
wing nut (7).
• Attach the parallel fence if required.
• To remove the planer stand, proceed in reverse
order.
The part of the cutter that is not being
used must always be covered by the
guard or by the parallel fence.
Instructions for use
Always observe the safety instructions
and applicable regulations.
Stationary use (fig. B)
• Switching ON: press the lock-off button (17) and
subsequently press the ON/OFF-switch (16).
• Place the locking wedge (18) to lock the ON/
OFF-switch.
• Release the lock-off button (17).
• Switching OFF: remove the locking wedge (18)
from the ON/OFF-switch.
Always use a pusher rod (15).
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT attachment has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your attachment requires no additional lubrication.
en - 3
Unwanted products and the
environment
Take your attachment to an authorized D
repair agent where it will be disposed of in an
environmentally safe way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the
performance of your D
it within 30 days, complete as purchased, to a
participating Dealer, or an authorized D
repair agent, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your
D WALT tool, in the 12 months following
E
purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of
E
purchase must be produced. Includes labour and
spare parts for the attachments.
Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due
E
to faulty materials or workmanship within
12 months from the date of purchase, we
guarantee to replace all defective parts free of
charge or, at our discretion, replace the unit free
of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by
unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit
and is additional to consumers statutory rights.
For the location of your nearest authorized
D WALT repair agent, please use the appropriate
E
telephone number on the back of this manual.
WALT
E
WALT tool, simply return
E
WALT
E
10