Operating Your Transmitter - AirPro Progress Lighting P250063 Manual De Instalación

Restore power to ceiling fan and test for proper
operation.
1. " 0 , 1 , 2 , 3 , 4 , 5 , 6 " buttons:
These seven buttons are used to set the fan speed as
follows:
0 = Turn the fan ON/OFF
1 = Minimum speed
2 = Low speed
3 = Medium low speed
4 = Medium speed
5 = Medium high speed
6 = High speed
2. " " button: No function.
3. " " button: Reverse switch
(control the direction)
Figure 17

9. Operating Your Transmitter

Installing the Remote Control
Holder and Battery
Attach the remote control holder with the remote
control holder mounting screw. (Figure 18)
Install a 3V battery (included) into the remote
control. To prevent damage to the remote control,
remove the battery if not use for long periods.
(Figure 18)
x 2
Q
Figure 18