Double DIN radio provision
1. Mount the brackets to the radio
with the screws supplied with the
radio. (Figure A)
2. Snap the radio housing trim panel
into the factory trim bezel from the
back side of the bezel. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections to
the new radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
4. After connecting all wiring, mount
the new radio assembly into the
dash with the factory screws and
reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
95-7365B
(Figure B)
3