Sentec HB-010069 Manual De Instrucciones página 6

EN | Directions for Lay Users
B) Sensor application using EC-MI
1
2
3
4
6
https:/ /youtu.be/
vBeiLWBHmPk
Measurement
Sites
Ensure SDM
displays "Ready
for use".
Clean
Measurement
Site selected by
the home care
provider, using
Isopropanol 70%
soaked wipe.
Pull both adhesive
tapes off Ear Clip,
attach Ear Clip
to earlobe with
retainer ring on
the back side.
Open Docking
Station, remove
sensor, close
Docking Station.
Note: Do not
touch the sensor
surface with any
hard objects
or fingernails.
Otherwise, the
sensor could be
damaged.
5
6
7
Apply one drop of
Contact Gel to the
sensor surface
Note: Avoid
contact with
injured skin. Do
not use when
exhibiting allergic
reactions to one of
the components.
Click sensor into
Ear Clip rotate
sensor to spread
Contact Gel
Note: Earlobe
must cover the
entire sensor
surface. Ensure
to hold the sensor
such that the
contact liquid
does not run off
the sensor face.
Wrap the sensor
cable around the
ear and secure it
with an adhesive
tape.
Note: Do not lie
on Ear Clip as
this may lead
to incorrect
measurements.
Important Note:
Route the sensor
cable properly (e.g.
with a Clothing
Clip) to avoid
entanglement or
strangulation.