Safety Protections; Safety Labels - Rubi T-7500-M Manual De Instrucciones

B. NORMS APPLIED AND SAFETY MEASURES
Each component of the machine may be potentially dangerous if used in the wrong way or if maintenance and servicing have not been properly carried out.
The T-7500-M is in compliance with the following regulations and European directives:
• 89/392-91/368 DIRECTIVE ON MACHINES
• EN 292 part 1 and 2. MAIN CONCEPTS AND GENERAL PRINCIPLES ON MACHINE SAFETY
• 89/336 ELECTROMAGNETIC COMPATIBILITY

1.- SAFETY PROTECTIONS

The machine is equipped with a range of protections that ensure its operation in safe conditions. Below you will find a list of the main components:
• External hood.
• Adhesive labels indicating the hazardous situations when the machine is being operated.
• Electrical system with 24V switches.
• STOP safety switch.
• Differential magnetothermic security switch.
We would like to remind you that letting the machine operate with damaged, not perfectly working or even missing protections may be
extremely dangerous. Therefore we advise you never to change or alter safety devices. In case you find them deteriorated, immediately
repair or replace them.

2.- SAFETY LABELS

All warnings described in this safety manual haVe been duLy identified on labels attached to the machine in prominent places, and advising of the presence of a risk
and potential dangers.
These labels play for all effects an essential role in the safe operation of the machine. If one of these labels is removed or becomes unreadable, we advise you to
contact your dealer for its replacement.
They are distributed on the machine as illustrated in picture.
1.- Always wear helmet and working garments
2.- Before opening doors, disconnect the power supply
3.- Read the user and maintenance manual.
3/5.- Do not remove casings or safety protections.
ENGLISH
3.-Warning! Risk of hand entrapment
3- Warning! Possible object projectio
3.- Keep away from the parts in motion of
the machine.
4.-Always wear helmet and working
garments
RECYCLING SYSTEM
-15-
6.-Lifting points
7.- Lubrication label
8.- Rotation of the crusher