Bode 100 Specifications - Omicron Lab Bode 100 Guia De Inicio Rapido

5.2

Bode 100 specifications

Table 5-2: Bode 100 specifications:
Characteristic
OUTPUT
Voltage range
Frequency range
Wave form
Source impedance
Connector
INPUT CH 1, INPUT CH 2
AC measurement range
Frequency range
Input impedance
Connectors
Input attenuators
Receiver bandwidth
Dynamic Range
Gain Error
Phase Error
PC interface
Universal serial bus
Connector
DC Power requirements
Supply voltage range
Minimum DC supply power
Connector
We strongly recommend to use the power supply delivered with Bode 100.
OMICRON Lab
Rating
-30 dBm...13 dBm
7 mVrms...1 Vrms at 50 Ω load
14 mVrms...2 Vrms at high impedance load
1 Hz...50 MHz
sinusoidal
50 Ω
BNC
100 mVrms full scale with 0 dB input attenuation
10 Vrms full scale with 40 dB input attenuation
1 Hz...50 MHz
Selectable via software:
50 Ω or
1 MΩ ±2% || 40...55 pF (AC-coupled)
BNC
Selectable via software:
0 dB, 10 dB, 20 dB, 30 dB, 40 dB
Selectable via software:
1 Hz, 3 Hz, 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz,
3 kHz , 5 kHz
> 100 dB (10 Hz receiver bandwidth)
< 0.1 dB (calibrated)
< 0.5° (calibrated)
USB 2.0 or higher
USB type B socket
+9 ... 24 V
10 W
Coaxial power socket (2.5 mm / 5.5mm)
Technical data
13