All manuals and user guides at all-guides.com
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby
presenting a hazard to other persons.
▶ Push the battery into the tool from the rear until it is heard to engage with a click.
5.2 Removing the battery
▶ Remove the battery.
5.3 Fitting the belt hook (optional)
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself and others.
▶ Check that the belt hook is fitted securely before beginning work.
Note
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can
be fitted to allow attachment on the left or right side of the body.
▶ Fit the belt hook.
5.4 Fitting the side handle
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Make sure that the forward / reverse switch is in the middle position (safety lock engaged) or that
the battery has been removed from the drill / driver.
▶ Fit the side handle.
5.5 Adjusting the side handle
▶ Adjust the side handle to the desired position.
5.6 Selecting the gear
▶ Select the desired gear by adjusting the two gear selector switches.
5.7 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.8 Fitting the accessory tool
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Check that the connection end of the accessory tool is clean. Clean the connection end if necessary.
3. Open the keyless chuck.
18
3
4
5
6
7
8