Braun Silk epil SoftPerfection 3390 Manual Del Usuario página 12

Both rollers of the 4-way moving pain
softener should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate and
relax the skin for a gentler epilation.
If you are used to epilation and look for
a faster way to efficiently remove hair,
please use the EfficiencyPro clip
Placed on the epilation head instead of
the 4-way moving pain softener, it
allows maximum skin contact and
ensures optimum usage so that more
hairs are removed in one stroke.
3 Leg epilation
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4 Underarm and bikini line epilation
Please be aware that especially at the
beginning these areas are particularly
sensitive to pain. With repeated usage
the pain sensation will diminish.
For more comfort, ensure that the hair
is at the optimum length of 2–5mm.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up so that the skin
is stretched and guide the appliance in
different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
substances such as deodorants with
alcohol.
Cleaning the epilation head
5 After epilating, unplug the appliance
and clean the epilation head:
If you have used one of the attach-
ments or , first remove it and
1a 1b
clean it with the brush.
6 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
12
All manuals and user guides at all-guides.com
.
1b
Turn the product around and clean the
tweezers with the brush while turning
the barrel manually.
7 Remove the epilation head by pressing
the release buttons
right and pull it off.
Give the top of the housing a quick
clean with the brush. Place the epilation
head and the 4-way moving pain
softener back on the housing.
B Shaving
1. Remove the OptiTrim
Put on the shaver head
it in (the long hair trimmer should be in
front).
2. When using the shaver head, always
slide the switch up to setting «2».
3. For best results, guide the shaving
system in a way that about half of the
shaving foil and the long hair trimmer
are in contact with your skin. Always
guide the appliance in the direction of
the trimmer. The trimmer first raises all
long hairs and cuts them off. Then the
flexible foil follows to smooth away
any stubble.
Pre-cutting hair for epilation
4. If you choose to pre-cut your hair to
the ideal length for epilation, place the
OptiTrim attachment onto the shaver
head.
5. Hold the appliance with the OptiTrim
attachment ensuring that the surface
of the comb is lying flat on the skin.
Guide the appliance with the comb
tips against the hair growth as shown
in illustration B 5.
N.B. As hair does not always grow in
the same direction it may be difficult to
cut. In which case, guide the appliance
slightly diagonally or in different
directions.
on the left and
3
attachment.
8a
by clicking
8