Taking Pictures - CONCORD EyeQ Go! Manual Del Usuario

TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOM
Image displayed on
the Internal LCD
Display is blurred
when looking through
the viewfinder.

TAKING PICTURES

Picture taken is of
poor quality.
Image is blurred when
looking through the
viewfinder in Capture
mode.
Daylight picture taken is
too dark.
POSSIBLE
CAUSE
Diopter Adjustment Ring
needs to be refocused.
Lens is dirty or smeared.
Poor lighting.
Subject is too close
when the camera is set
to Capture mode.
Subject is not within the
recommended Macro
fucus range when
shooting in Macro mode.
Camera moved as picture
was taken.
Lens is dirty or smeared.
Viewfinder is dirty.
The subject is in front of
bright light.
20
POSSIBLE
SOLUTION
Adjust the Diopter
Adjustment Ring while
looking through the
viewfinder until the
image is focused.
Clean the lens with a
soft cloth.
Take picture in better
lighting.
Move subject further
away or use Macro
mode.
Move the subject to a
distance within 30-60cm
from the camera.
Hold camera steady until
picture is taken.
Clean the lens with a
soft cloth.
Clean the viewfinder
with a soft cloth or
cotton swab.
Change the subject's
position.