Loading The Batteries; Turning The Camera On/Off; Taking Pictures - CONCORD Eye-Q VGA Guia De Inicio Rapido

GETTING STARTED / TAKING PICTURES
IMPORTANT INFORMATION
The Concord Eye-Q VGA camera uses a type of memory that continually draws power to retain pictures
and/or video clips in the camera s internal memory, even when the camera is powered off. If the battery
power is depleted and you have not transferred your images to the computer, you will lose them. It is strongly
recommended that you transfer your images and/or video clips to the computer promptly, then remove the
batteries to preserve power.
If you have not transferred your pictures to your computer and your batteries are low, immediately connect
your camera to the computer via a USB cable (included). While connected to the PC, you can change the
batteries and transfer the images. If you attempt to change the batteries BEFORE connecting to the PC, you
will lose all files stored in the camera!
Always use fresh batteries and we strongly recommend you use NiMH rechargeable batteries (not included)
to optimize the performance of your camera.

LOADING THE BATTERIES

1. Slide open the battery cover.
2. Insert 2x AAA batteries according to the polarity directions ( + ) ( – ) indicated on the inner side of the
battery door.
3. Shut the battery door.

TURNING THE CAMERA ON/OFF

1. Press and hold the Mode button for about 3 seconds to turn the camera on.
2. The camera will be automatically powered off after 30 seconds of inactivity.
To turn the camera off manually,
• If there is no any icon blinking on the LCD, press and hold the Mode button for about 3 seconds to turn
the camera off.
• If there is icon blinking on the LCD, press the Mode button repeatedly until none of the icons are
blinking, then press and hold the Mode to turn the camera off.

TAKING PICTURES

1. Turn on the camera.
2. Frame the subject in the viewfinder.
3. Press the Shutter button to take the picture.
• You will hear a beep when a picture is taken.
• The frame number will increase by one frame on the LCD panel. For example, if it s the first time to
power on the camera, the frame number will be changed from 00 to 01 after the first picture is taken.
TAKING PICTURES IN SELF-TIMER MODE
1. Turn on the camera.
2. Frame the subject in the viewfinder.
3. Place the camera on a flat surface or tripod.
4. Press the Mode button repeatedly until the Self-Timer Mode icon (
5. Press the Shutter button.
• The camera will take a picture automatically after 10 seconds. The Buzzer will beep slowly for about 7
seconds and then rapidly for about 3 seconds.
• The Self-Timer will be deactivated once the picture is taken.
All manuals and user guides at all-guides.com
2
) is blinking.