TW Steel CEO DIVER AUTOMATIC Manual De Instrucciones página 3

ADJUSTING THE DAY/DATE
The CEO Diver Multi Function Automatic has a
rapid date adjustment. This rapid adjustment works
as follows:
You unscrew the crown from the case by turning it
anti-clockwise. You then pull the crown out with one
click. When you have reached this position, you can
move the date by turning it clockwise. To move the
day, turn the crown anti clockwise. Then press the
crown towards the case and screw the crown back
on the case by turning it clockwise.
WE STRONGLY ADVISE YOU NOT TO CHANGE THE DATE BETWEEN 22.00 AND
02.00 H. AS IT CAN DAMAGE THE DATE..
CHANGING THE TIME/MONTH
You unscrew the crown from the case by turning it anti-
clockwise. You then pull the crown out with two clicks. This
must be done carefully. You will see that the second hand
stops. By turning the crown, you can then set the desired
time. To adjust the month press button D.
After changing the time, press the crown towards the case
and screw the crown back on the case by turning it clockwise.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Hour hand
24-hour hand
USE OF THE CROWN
Second hand
Day hand
Date
DATE DAY
TECHNICAL INFORMATION OF THE MULTI
FUNCTION AUTOMATIC CEO
• Miyota Multi Function Automatic movement Cal. 9100 with shock
absorber
• 26 jewels
• Reserve energy 42 hours, with power reserve display
• Winding component runs on ball bearings with 28.800 A/h
• With day, date and month indicator
• Scratchproof sapphire crystal on the back and the front
• 10 ATM water resistant
• Case and clasp: Solid stainless steel (316L)
(0) position
Power reserve
hand
Button D
Crown / normal
crown position
Minute hand
24-hour hand