Human Touch Perfect Chair Manual De Instrucciones

humantouch.com
Questions? Call Human Touch Customer Service at 800-355-2762.
© 2012 Human Touch , LLC.
®
PC-BACKRESTCOVER-A0
Installing your Perfect Chair
back cover.
Parts
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
Note: Prior to installing, remove any protective cover strips that may have
been applied to the hook-and-loop fasteners on your PC Back Cover.
IF YOUR PERFECT CHAIR CURRENTLY HAS THE STANDARD
FOOTREST AND PADS INSTALLED, FOLLOW THESE STEPS
TO REMOVE THEM:
1
Remove the head pillow from the chair.
From the front side of the back pad, reach up into
2
the head pad, and locate the edge of the body pad
retaining flap.
Pull down firmly on the retaining flap to detach it from
3
the head pad.
Slide the head pad upward, off of the headrest frame,
4
then remove it from the chair (Fig.1).
Slide the head sock upward, off the headrest frame,
5
then remove it from the chair (Fig.2).
6 Pull forward on the flap to detach the body pad from
the chair, then fold the body pad forward onto the
chair seat (Fig.3).
®
Backrest cover
Retaining flap
Head pad
Head sock
(Fig.1)
Head sock
(Fig.2)
Body pad
(Fig.3)