Installing And Replacing The Batteries; Setting Date & Time - Salter MiBody Manual De Instrucciones

INSTALLING AND REPLACING THE BATTERIES

1. Open the battery door.
2. Insert the batteries according to the polarity indications.
(Always select the authorized / specified battery: Two AAA-size alkaline batteries).
3. Close the battery door.
Replace the batteries under following circumstances:
• displays on the LCD
• The LCD display dims
• When powering on the monitor, the LCD doesn't light up.
CAUTION
• Remove batteries if the device is not likely to be used for some time.
• Worn batteries are harmful to the environment. Do not dispose with daily garbage.
• Remove the old battery from the device following your local recycling guidelines.
SETTING DATE & TIME
1. When the monitor is off, press and hold
SET
2. The hour digits will flash. Press
3. Press to confirm.
SET
MEM
4. The minute digits will flash. Press
5. Press to confirm.
SET
MEM
6. The month digits will flash. Press
7. Press SET to confirm.
MEM
SET
8. The day digits will flash. Press
9. Press to confirm.
SET
MEM
SET
10. The year digits will flash. Press
11. Press to confirm.
SET
MEM
12. dOnE will be displayed then the monitor will turn off.
Note: To update or change the time or date repeat the above procedure making changes as required.
MiBODY APP
Before using your device for the first time:
1. Download and install the Salter MiBody App from the App store. Use keyword search terms "Salter" or "MiBody"
2. Turn Bluetooth "On" in the "Settings" menu of your iPhone/iPad.
3. Open the MiBody App and follow the on screen instructions to set up your user account.
button for 3 seconds.
SET
MEM
button to change the hour.
MEM
SET
button to change the minute.
MEM
SET
button to change the month.
MEM
button to change the day.
MEM
button to change the year.
MEM
5
GB