Infrared Remote Control 6) Operation - Chauvet DJ Gig BAR IRC Manual Del Usuario

IRC-6 (Infrared Remote Control 6) Operation
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
GigBAR™ IRC User Manual Rev. 3
All manuals and user guides at all-guides.com
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
·
Press and hold <AUTO> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> All On
o
<1> AP01
o
<2> AP02
o
<3> AK01
o
<4> AL01
o
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press and hold <SOUND> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> All On
o
<1> SP01
o
<2> SP02
o
<3> SK01
o
<4> SL01
o
Strobe Modes
To adjust the strobe program and rate:
·
Press and hold <STROBE> on the IRC-6.
·
Press <0> to Strobe All, or any number between <1> and <9> to choose your auto
program.
·
Press <+> or <–> to increase or decrease the strobe rate.
·
Press <STROBE> again to turn off the strobe.
Miscellaneous Operation
To adjust the fade rate of the Par and Derby color output:
·
Press and hold <FADE> on the IRC-6.
·
Press <+> or <–> to increase or decrease the fade rate.
To adjust the brightness of color or strobe:
·
Press <%> on the IRC-6.
1 x Press 2 x Press
100%
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
o
o
o
o
o
o
o
o
o
o
3 x Press 4 x Press
75% 50% 25%
<5> APK1
<6> APL1
<7> AKL1
<8> APKL
<9> AKLS
<5> SPK1
<6> SPL1
<7> SKL1
<8> SPKL
<9> SKLS
5 x Press
0%
Page 27 of 96