6.
Draw end of connection bunch along vehicle bunch to fuse box.
a) Connect browne, earth cable to earth (e.g. drill a 3 mm hole, connect and fix the eyelet terminal with sheet metal
screw; do not secure the hole with anti-corrosion agent).
7.
Vehicles without lighting installation control:
a) There is a 20-input joint located above fuse box. Clip quick joints on vehicle cable and connect a gray cable of
connection bunch to it (fog lights),
b) Cut off three small ends from black/red, grey/red and grey/black cable and clip supplied ends on the cables,
c) There are A and B plugs located in fuse box, precisely
above fuses (see fig. 2). Clip quick joints near rear
cable outputs, according to marking on the figure,
d) Connect ends with the following cables to quick joints
grey/red
in
black/white
8.
Vehicles with lighting installation control:
a) Put three small ends on grey/black, grey/red and black/red cables in empty places of A and B plugs located above
fuses (see fig. 3)
grey/red in
b) Clip quick joints near rear cable outputs, according
to marking on v, w, t and z figures. There is no cable
in "v" position in some models from 1999. In such
case, cut end on cable of connection bunch, clip
small end and put it into "v" position,
c) Connect ends with the following cables to quick joints (see fig. 3).
black/white in z pos.
grey
9.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow, white/brown leads) is provided for expanded socket
functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the following
parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
x pos.
in
z pos.
x pos.
in v pos.
u
t
black/red
in
y pos.
black/green in
w pos.
black/red
in
ypos.
u
t
black/green in w pos.
part no. 014-169
part no. 015-069
fig. 2
A
x
w
grey/black
blue/red in t pos.
grey/black
in u pos.
fig. 3
A
x
v
w
blue/red in t pos.
B
y
z
in u pos.
B
y
z