Steinbach APPcontrol Manual Original página 48

Stopping cleaning
Cleaning stops automatically once the set running time has expired.
All LEDs of the cleaning type and running time indicators blink.
Press the ON/OFF button to stop cleaning before the time is up.
The control unit is switched off, all LEDs are off.
Disconnecting the control unit
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
1. Disconnect the power plug from the grounded socket.
2. Undo the screw fitting of the plug on
the control unit
floating cable
The control unit is disconnected.
Lifting the device out of the pool
Risk of electric shock if the control unit drops into the filled pool
while it is connected to the power supply.
- Pull the power plug out of the socket before lifting the device out
of the pool.
1. Slowly pull the device by the floating cable
can reach the handle
48
Risk of electric shock!
and pull of the
3
.
6
Risk of electric shock!
.
8
WARNING!
8
WARNING!
towards the water surface until you
6
3
6