Safety Warnings; Preliminary Information; Identification; Product Identification - Femi job Line DP 12-942 PRO DISPLAY Manual Del Usuario

1. Safety warnings

Refer to "General safety regulations".

2. Preliminary information

Refer to "General safety regulations".

3. Identification

3.1. Product identification

NAME
Drill press

3.2. CE Declaration of conformity

EN- DECLARATION OF CONFORMITY
in compliance with European Directive 2006/42/EC
Annex II.A
FEMI SpA
Via del Lavoro, 4
40023 Castel Guelfo - (BO) ITALY
declares that the machine:
DRILL PRESS
MODE.: DP 12-942 PRO DISPLAY / DP 12-954 PRO
DISPLAY
manufactured in (see label reported on page 203):
▪ conforms to the regulations indicated in Directive
2006/42/EC and the regulations of implementation;
▪ furthermore, it conforms to the following regulations
and relative implementation: 2014/30/EU, 2014/35/
EU, 2011/65/EU, 2012/19/EU.
References of harmonised standards:
▪ EN12100:2010
▪ EN 12717:2001/A1+2009,
▪ EN 60204-1:2006/A1:2009,
▪ EN 55014-1:2006/A2:2011
▪ EN 55014-2:1997/A2:2008
▪ EN61000-3-2:2014
▪ EN 61000-3-3:2013
The person authorised to draw up the technical file:
MAURIZIO CASANOVA
c/o FEMI S.p.A. Via del Lavoro, 4
40023 Castel Guelfo - (BO) ITALY.
18 ▪ English
MODEL
DP 12-942 PRO DISPLAY
DP 12-954 PRO DISPLAY

3.3. After-sales service

Refer to "General safety regulations".

4. Safety

4.1. Safety devices

POS.
DEVICE
OF
MOBILE INTER-
A LOCKED
GUARD
PLEXIGLAS
B
CHUCK GUARD
EMERGENCY
C
BUTTON
A
B
WARNING!
remove and/or tamper with the
safety devices of the machine.
DP 12-942 / DP 12-954 (PRO DISPLAY)
DESCRIPTION
If it is opened, the machine
stops.
It protects the operator
against contact with the
rotating tool or with parts
ejected during processing.
If pressed, it disconnects
power supply.
C
It is forbidden to