Safety Warnings; Preliminary Information; Identification; Product Identification - Femi job Line DP 12-941 Manual Del Usuario

1. Safety warnings

Refer to "General safety regulations".

2. Preliminary information

Refer to "General safety regulations".

3. Identification

3.1. Product identification

NAME
Drill press

3.2. CE Declaration of conformity

EN- DECLARATION OF CONFORMITY
in compliance with European Directive 2006/42/EC
Annex II.A
FEMI SpA
Via del Lavoro, 4
40023 Castel Guelfo - (BO) ITALY
declares that the machine:
DRILL PRESS
MOD.: DP 12-941 / DP 12-943
manufactured in (see label reported on page 163):
▪ complies with the provisions of Directive 2006/42/
EC and the implementing provisions;
▪ furthermore, it complies with the following provisions
and related implementations: 2014/30/EU, 2014/35/
EU, 2011/65/EU, 2012/19/EU.
Harmonised standards:
▪ EN 61029-1:2009+A11:2010,
▪ EN 12717:2011+A1:2009,
▪ EN 55014-1:2006+A1+A2
▪ EN 55014-2:2015
▪ EN 61000-3-2:2014
▪ EN 61000-3-3:2013
The person authorised to prepare the technical file:
MAURIZIO CASANOVA
c/o FEMI S.p.A. Via del Lavoro, 4
40023 Castel Guelfo - (BO) ITALY.
INSTRUCTION MANUAL - TRANSLATION OF THE ORIGINAL INSTRUCTIONS
MODEL
DP 12-941 DP 12-943

3.3. After-sales service

Refer to "General safety regulations".

4. Safety

4.1. Safety devices

POS. DEVICE
MOVABLE INTER-
A LOCKED
GUARD
PLEXIGLASS
B
CHUCK GUARD
C OFF BUTTON
B
C
WARNING! It is forbidden to remove
and/or tamper with the machine's
safety devices.
DESCRIPTION
If it is opened, the machine
stops.
It protects the operator against
contact with the rotating tool
or with parts ejected during
processing.
If pressed, it disconnects the
power supply.
A
English ▪ 15