Lista De Parámetros - Jung FMAS816REG Instrucciones De Servicio

eNet
Actuador pulsador/de conmutación 8 fases / actuador persianas 4 fases
eNet, carril DIN
Lámparas fluorescentes sin compensación
Carga capacitiva
Conexión bornes de carga
monofilar
flexible sin funda terminal
flexible con funda terminal
Anchura de montaje
Cable de bus
Tensión nominal
Consumo de corriente
Conexión bus
Longitud de cable
6.2 Lista de parámetros
Los parámetros de dispositivo pueden ser modificados con el servidor eNet:
Settings window
Device settings
Parameters
Manual commissioning
Channel 1, 5
Channel 2, 6
Channel 3, 7
Channel 4, 8
Settings, "Switching" channel
Parameters
Manual commissioning
82581923
J0082581923
Setting options, Basic set­
ting
On, Off
Basic setting: On
Switching, shutter/blind
Basic setting: Venetian blind
Switching, shutter/blind
Basic setting: Venetian blind
Switching, shutter/blind
Basic setting: Venetian blind
Switching, shutter/blind
Basic setting: Venetian blind
Setting options, Basic set­
ting
On, Off
Basic setting: On
10/17
690 VA (560 µF)
1,5 ... 4 mm²
0,75 ... 4 mm²
0,5 ... 2,5 mm²
72 mm / 4 módulos
DC 12 V MBTS
Borne de conexión
Explanations
Disables manual commissio-
ning for all device channels. In
the "Off" setting, the device
cannot be reset to the factory
setting.
Specifies whether Channels 1
and 5 work as switching or Ve-
netian blind outputs.
Specifies whether Channels 2
and 6 work as switching or Ve-
netian blind outputs.
Specifies whether Channels 3
and 7 work as switching or Ve-
netian blind outputs.
Specifies whether Channels 4
and 8 work as switching or Ve-
netian blind outputs.
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
920 VA
60 mA
máx. 3 m
22.07.2016