Kohler K-19481 Guia De Instalacion página 3

Washer
1. Install the Faucet
Thread the mounting studs into the holes in the bottom of the
faucet body.
NOTE: The base of the faucet may be attached to the bidet using
either the supplied rubber washer or plumbers putty to form a
watertight seal. Do not attach the faucet to the bidet using both the
rubber washer and plumbers putty.
For rubber washer attachment: Slide the rubber washer over the
supply inlets and up to the faucet base.
For plumbers putty attachment: Apply plumbers putty or other
sealant to the underside of the flange of the faucet base, as
shown. Refer to the putty manufacturer's instructions for proper
application.
Feed the faucet supply inlets through the faucet hole of the bidet,
then properly position the faucet.
Slide the washer and bracket over the mounting studs, then
securely tighten the nuts to the mounting studs.
Kohler Co.
Rubber
Washer
Apply
Supply Inlets
plumbers
putty.
Bidet
Mounting Stud
Nut
Bracket
3 1050856-2-A