LIMIT 98 Manual Del Usuario página 10

GB
11. Unit setup
11.1 Press Mode key 8 times or until C or F start flashing to enter Temperature unit setup (shown below).
11.2 Press UP or DOWN arrow keys change between Celsius (°C) and Fahrenheit (°F).
Note: Instrument will exit setup after 5 seconds if there are no operations.
12. Data logger setup
12.1 Limit 98 is capable for storing up to 100 data measurements.
12.2 To store data, pull and hold the trigger while pressing Mode key until LOG appears in the lower left
corner of the display.
12.3 Aim the unit at the target areal you want to record and press the Backlight / Laser button.
12.4 The recorded temperature will appear at the right side of LOG symbol.
13. Recalling data
13.1 Pull and hold the trigger while pressing Mode key until LOG appears in the lower left corner of the
display.
13.2 The Log sequence number is showed over the stored temperature reading. Over the Log icon.
13.3 Press UP or DOWN arrow key to step between stored values.
6
English