Hedge Trimmer Safety Warnings - Parkside PHSL 900 A3 Traducción Del Manual De Instrucciones Original

GB IE
Keep cutting tools sharp and
f)
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, tak-
ing into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Hedge trimmer safety
warnings
IMPORTAnT
READ CAREFULLY BEFORE USE
KEEP In YOUR FILES
Preparation
a) THIS HEDGE TRIMMER CAN CAUSE
SERIOUS INJURIES! Read the instruc-
tions carefully regarding the correct
handling, preparation and maintenance,
for starting and stopping the hedge trim-
mer. Familiarise with all controls and
the proper use of the hedge trimmer.
b) Children must never use the hedge
trimmer.
c) Caution! Notice overhead power lines.
d) Use of the hedge trimmer should be
avoided when people, especially
children, are nearby.
e) wear suitable clothing! Do not wear
loose clothing or jewellery that can
28
become jammed in the moving parts.
It is recommended that you wear solid
gloves, non-slip shoes and protective
goggles.
f) If the cutting unit contacts a foreign
body or if the operating noises increa-
se or the hedge trimmer vibrates with
unusually high force, turn off the motor
and let the hedge trimmer come to a
standstill. Pull the mains plug and take
the following measures:
- check for damages;
- check for loose parts and fasten all
loose parts;
- replace damaged parts with equiva-
lent parts or have them repaired.
g) Wear hearing protection.
h) Wear eye protection.
i) Release the on-off button to shut down
the device in an emergency.
Operation
a) Switch the appliance off and remove
the mains plug, before:
- cleaning or removing a blockage;
- inspection, servicing or work on the
hedge trimmer;
- adjusting the working position of the
cutting unit;
- leaving the hedge trimmer unattended.
b) Always ensure that the hedge trimmer
is properly placed in one of the indica-
ted working positions before the motor
is started.
c) While operating the hedge trimmer,
always ensure that you have a secure
footing.
d) Do not use the hedge trimmer with a de-
fective or strongly worn-out cutting unit.
e) To avoid the risk of fire, ensure that the
motor is free from deposits, leaves or
leaked lubricant..
f) Always ensure that all handles and
safety devices are mounted when you