Uline H-2171 Instrucciones De Ensamblaje página 6

3. Secure leg to top by inserting four bolts into
threaded inserts along the end of the tabletop.
4. Tighten all bolts.
MOUNTING STEEL TOP TO PEDESTAL
1. Bolt channel to holes approximately 14⁄" away
from tabletop end using two 1/4"-20 x 5/8" bolts.
(See Figure 20)
NOTE: Nine threaded inserts are provided for
each channel.
Figure 20
14¼"
2. Insert two 1/4"-20 x 5/8" bolts into threaded inserts in
each channel (four total). Do not fully tighten. Leave
about 5/8" between channel and bolt heads.
(See Figure 21)
5/8"
Pedestal
Side
Figure 21
PAGE 6 OF 18
STEEL TOP ASSEMBLY CONTINUED
Pedestal Side
1-800-295-5510
uline.com
MOUNTING STEEL TOP AND LEG TO PEDESTAL
1. Remove top two drawers or open cabinet doors.
2. Set top assembly onto pedestal, placing bolt heads
into keyhole slots, and slide forward.
(See Figure 22)
NOTE: Leveling feet on pedestal can be
adjusted to level with the tabletop.
Figure 22
3. Position top so that ends of top are flush with cabinet
sides and tighten all bolts. Replace drawer or close
cabinet door.
4. Assembly is completed. (See Figure 23) Check all nuts
and bolts for tightness. Adjust pedestal leveling feet if
needed.
Figure 23
Completed
Assembly
1120 IH-2171