YABER Y31 Manual Del Usuario página 7

Bo�om
a
a Projector Mount Hole ( 4 holes )
Dus�ng Mouth
b
STARTING PROJECTOR
Turn on the projector
1.Install two AAA ba�eries in the remote control before using.
2.Press the Power key on the remote or panel, the indicator light will turn blue.
3.Remove the lens cover of the projector, the lamp will start working 2 seconds later, when
an image is projected on the screen the machine is working smoothly. If the first projec�on
screen is not the start up screen, press the " " bu�on on the remote and select USB source.
4.Adjust the keystone ring to get a rectangle shape.
5.Adjust the focus ring or rotate the lens of the projector to get the best image
performance. (If it is s�ll blurry, please try to adjust the projec�on distance.)
6.If you connect other devices, be sure to select the corresponding source. If you do not
select the correct source, the projector will not be able to detect the signal.
7.Press the" " bu�on on the remote control to enter the OSD Language to set your
preferred language;
Fix with M4x10mm screws
Clean the dust if has black spot
EN EN 04 01
a