Recording The Tracks On Cd; By Specifying The Tape Length - Sony ZS-D5 Manual De Instrucciones

Recording the
tracks on CD
by specifying the
tape length
There are three options in editorial
recording:
• Recording all the tracks in the original
CD order (EDIT ALL)
• Recording programed tracks (EDIT
PGM)
• Recording a single track you have
selected (EDIT 1TRACK)
Tips
• You can edit a CD
having 20 tracks or
fewer.
• We recommend that
you use AC power as
the power source for
optimum recording
quality.
Note
Do not open the CD
compartment while
editing; the settings for
recording will be
erased. If you do, start
from step 1 again.
22 EN
The Tape Player
r/P
Recording all the tracks on CD (EDIT ALL)
Approximately the first half of the CD will be
recorded on one side of the tape, and the second half
will be recorded on the other side, without reversing
the tape in the middle of a track. According to the tape
you use, you can set the total recording time.
1
Press p on the CD section until "Cd" appears in
the display.
2
Press EDIT to display "E-ALL".
The tape length (unit: 2
minutes, up to 98 minutes)
you need to record the
whole CD appears in the
display.
Example: The total tape length needed to record
the entire CD is "26" minutes. The maximum
recording time for each side is 13 minutes.
Track Nos.: 1 2
Length: 01:20 02:30 03:40 04:50 05:10 04:20 01:30
(minutes) Side A (12:20)
EDIT DISPLAY ENTER
p
MEMORY
3 4 5
Side B (11:00)
, +
=
6 PUSH
OPEN/CLOSE
(
.
6 7