Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
To reduce the risk of injury, only STANLEY FATMAX
recommended accessories should be used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Blades
The saw will accept a blade up to 30 cm long. Always use the
shortest blade suitable for your project but long enough to
keep the blade cutting through the material. Longer blades are
more likely to be bent or damaged during use. During
operation some longer blades may vibrate or shake if the saw
is not kept in contact with the workpiece.
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Z
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Input Voltage
No-load speed
Stroke length
Weight (without battery pack)
10
(Original instructions)
SFMCS310
V
DC
0 - 2300 / 0 - 3200
Min
-1
mm
kg
Cutting capacity
Wood
Steel
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
This tool is a Bare unit but can be used with the batteries in
the following table.
SFMCB201
Battery
Voltage
V
DC
Capacity
Ah
Type
Level of sound pressure according to EN62841:
Sound pressure (L
) at work station 83.0 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L
) 94.0 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Cutting board (a
) 27.1 m/s
h, B
Cutting wooden beams (a
EC declaration of conformity
SFMCS310 - Cordless hand held saw
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact Black & Decker at the following address or refer to the
18
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
28.6
2.3
mm
mm
SFMCB11
SFMCB12
230
230
18
18
1.25
2
SFMCB202
SFMCB204
18
18
18
1.5
2.0
4.0
Li-Ion
Li-Ion
Li-Ion
, uncertainty (K) 1.5 m/s
2
2
) 21.3 m/s
, uncertainty (K) 1.5 m/s
2
h, WB
%
MACHINERY DIRECTIVE
back of the manual.
SFMCS310
300
100
SFMCB14
230
18
4
SFMCB206
18
6.0
Li-Ion
2
Publicidad
Tabla de contenido
