Descargar Imprimir esta página

Mounting Instructions - Suzuki 990D0-31J35-000 Instrucciones De Montaje

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Description: Fog Lamp Clamp
Fog Lamp Shroud (990D0-31J30-000)
Fit:
No. Description
Part List
1.
Fog Lamp Clamp
2.
Rubber Inlay 1 (For Tube Diameter: 21,7 mm )
3.
Rubber Inlay 2 (For Tube Diameter: 28,3 mm )
4.
Rubber Inlay 3 (For Tube Diameter: 26 mm )
5.
Rubber Inlay 4 (For Tube Diameter: 27,2 mm )
Mounting Instructions (without picture)
6.
Please read this manual and follow its instructions carefully. To emphasize
IMPORTANT
special information, the symbol
NOTICE and NOTE have special meanings. These special meanings apply
except when laws or regulations require that the signal words be used with a
different meaning. Pay special attention to the messages highlighted by these
signal words.
Indicates a potential hazard that could result in death or serious injury.
Indicates a potential hazard that could result in minor or moderate injury.
Indicates a potential hazard that could result in vehicle or equipment damage.
NOTE: indicates special information to make maintenance easier or instruc-
tions clearer.
2

MOUNTING INSTRUCTIONS

990D0-31J35-000
Item:
Qty.
1
2
2
2
2
2
2
1
3
4
5
and the words WARNING, CAUTION,
!
WARNING
!
CAUTION
!
NOTICE
1.- Park the vehicle on a firm and even surface.
Preparation
2.- Turn off the vehicle and remove the ignition key. If necessary, allow the
engine/exhaust to cool prior to installation.
3.- Read these intructions carefully before assembly and examine whether all
parts are enclosed in accordance with the parts list.
4.- In order to avoid loosening of screws by vibration, we recommend securing
the threads with liquid thread-locker.
1.- Attach the fog light clamps as shown in the mounting instructions of the fog
Mounting
lamp shroud 990D0-31J30-000.
Due to mounted SUZUKI Genuine Accessories the service and maintanance
Inspection
flat rate might be affected. Dismounting / Mounting of SUZUKI Genuine
Accessories is possibly necessary for service and maintenance.
The holder of the vehicle should always be in possession of the mounting
instructions.
Attachments can loosen from vibrations. Examine the screw tightness in
regular intervals in agreement with the service manual.
CAUTION
!
CAUTION
!
11/2013
SUZUKI GENUINE ACCESSORIES

Publicidad

loading