assembly instructions
Weight Capacity: 300 lbs (136 Kg)
1.
Remove contents from carton.
2.
Lay seat upside down on a flat surface so the 4 leg
receptacles are facing upward.
3.
Insert first leg into the leg receptacle by depressing
push pin. When the leg is in place, the push pin will
extend out and lock the leg in place.
4.
Repeat Step 3 for the remaining 3 legs.
height adjustment
1.
Before use, adjust height of each leg
to your specific needs, making sure
all legs are at the same height. When
desired height is reached, lock legs into
place by aligning buttons into proper
holes, per illustration.
2.
To be sure legs are locked into place by
pushing down on or by pulling legs.
additional precautions
1.
Inspect all parts for shipping damage before
assembly. If there is shipping damage - DO NOT
USE. Contact dealer/carrier for further instructions.
2.
Make certain that the height adjusting snap buttons
fully protrude through the same respective hole of
each leg extension. This will ensure that the leg
extensions are securely locked in position and an
even height is achieved.
3.
Ensure thumb screws are tightened.
4.
Check the rubber tips on the leg extensions for rips,
wear or if they are missing. Immediately replace any
or all if any of these imperfections exist.
5.
All four leg extensions with rubber tips MUST touch
the floor simultaneously at all times.
6.
When used in a tub, make certain the rubber tips are
not touching the sides of the tub wall.
7.
DO NOT stand on chair.
NOTE: To maintain the beauty of the original finish, clean
with mild soap and rinse with warm water. Wipe bath
seat dry after each use.
maintenance
Drive recommends periodic visual inspection of this
product by the user, to ensure that all parts and hardware
are secure, that components are in good working order
and not worn, torn, frayed, loose, or rusted and that
there are no obstructions or impediments to normal,
safe operation. If any part or mechanism appears to be
unsafe or compromised, do not use the product. If you
experience problems, please contact the provider that
sold you the product or visit www.drivemedical.com/help
for more info.