Important notes
•
It is recommended not to open the door for at least 4 hours to allow the unit
to reach standard operating temperature.
•
The temperature of the beverages and how often the door is opened will
affect the temperature in the cooling unit. Change the temperature setting if
necessary.
•
Cool air sinks to the bottom and warmer air rises to the top, so there may be a
slight temperature difference between the top and bottom of the cabinet.
•
When the temperature is changed, the compressor works harder to reach the
desired temperature. During this time, the side walls of the wine cooler can
reach up to 45°C. However, these will cool down when the set temperature is
reached.
Switching between Fahrenheit and Celsius
•
You can choose whether the temperature display shows Celsius or Fahrenheit.
•
To change the temperature display from Celsius to Fahrenheit, you must touch
and hold the light on/off switch until the unit beeps and the °F display lights
up.
•
You cannot change the display when you are in the process of setting the wine
cooler temperature.
CLEANING AND CARE
Cleaning the Unit
•
First switch off the unit and disconnect the power plug from the socket.
Remove the entire contents.
•
Wash the interior with a damp cloth dipped in lukewarm water with a little
detergent.
•
Make sure that the rubber seal on the door is clean so that the unit remains
powerful.
•
The exterior of the wine refrigerator should be cleaned with a mild detergent.
•
Dry the inside and outside with a soft cloth.
•
Dust and anything else that blocks the exhaust air openings will reduce the
cooling capacity of the unit. If necessary, suck off the exhaust air opening.
EN
49