• Check that the juicer and/or assembly parts are not damaged. If this is
the case, do not use the appliance and return it to the place of purchase.
• Completely unwind the power cord.
• Place the motor on a stable surface that can be easily cleaned.
• Place the juice container on the motor base
• Then position the pulp regulator and finally the squeezing cone by
gently pressing until you hear a click.
• If you wish to squeeze bigger citrus fruits, you can use the second cone,
by placing it on top of the one already in place.
• Select the required pulp filtering level, by placing the pulp regulator at 1
for the lowest filtering level and 5 for the highest level.
• Place a glass under the pour spout and make sure that it is unlocked by
pulling it downward so that the juice can pour into the glass continuously
• Plug the power cord into a properly fitted socket.
• The juicer is ready for use.
INSTRUCTIONS FOR USE
1. Clean all the juicer parts as indicated in the section on CLEANING
before you use it for the first time.
2. Avoid applying too much pressure on the squeezer cone. Do not apply enough
pressure to stop the cone from turning. The motor could get damaged.
3. Correct operation timing control: turn on the appliance for 15s, then turn
off the appliance for 15s as a working circle; after you have operated the
appliance for 10 circles, you should stop the operating and turn off the
appliance for 30min to rest the appliance.
4. Keep away from delicate objects and/or surfaces that are hard to clean.
5. In order to prepare the citrus fruits, slice them in half and place them
near the juicer.
a. Press firmly with the cut surface of the two halves down on the
small or large cone.
18