with those on the drive base as shown below.
• Then position the pulp control and last of all, the
cone, by pressing lightly until you hear a click.
• If you wish to squeeze larger citric fruits, you can
use a second cone, by placing it on top of the one
already in place.
• Last of all, select the required level of pulp
straining, by using the pulp control, 1 being the
lowest straining level and 5, the highest level.
• Plug the cord into the mains, in a properly
installed socket.
• The juicer is now ready for use.
HOW TO USE
1. Clean all the juicer parts as indicated in the
section on CLEANING before first use.
2. Avoid applying too much pressure on the juicing
cone. Do not place such pressure as stops the
cone from turning. The motor could be damaged
as a result.
27