Alarm Mode - Grundig Music 61 Manual Del Usuario

ALARM MODE

Setting the alarm time
1 With the device switched off, press »MODE«
briefly.
– Display: the last alarm time set and »AL«.
2
Pres and hold down »MODE«.
– Display: the alarm time flash.
Note:
If you do not press any button within 8 sec-
7
onds, the device will quit set-up mode. Any
altered settings will be stored.
3 –« to set the hours step-by-
Press »TUNING
step.
4 +« briefly to set the minutes
Press »TUNING
step-by-step.
5 Press »MODE« to confirm the setting.
– Display: the set alarm time.
– After a short time, the display changes to the
current time.
Alarm with signal tone
1
Press »ON/OFF« to switch on the device.
2
Set the alarm signal (»
to the » « position.
e
Alarm with radio station
1
Press »ON/OFF« to switch on the device.
2
Set the alarm signal (»
to the » « position.
§
3 Select the station you want using the preset but-
tons »1« till »5« (preset stations 1 to 5) or using
»+5« and the preset buttons »1« till »5« (preset
stations 6 to 10).
4 Adjust the alarm volume using
5
Press »ON/OFF« to switch off the device.
6
Briefly press »MODE« to check the alarm time.
– Display: the set alarm time, »AL« and »
– After a short time, the display changes to the
current time, » « remains constant.
§
– The selected radio station switches on at the
set alarm time.
______________________________________________________
«) by moving »
e
§
e
«) by moving »
§
e
§
»+ VOL. –«.
«.
§
Briefly displaying the alarm time
1
With the device switched off, briefly press
»MODE«.
– The display changes from the clock to the set
alarm time,
– Display: »
e
– After a short time, the display changes back
to the current time.
Interrupting the alarm
1 Press »SNOOZE« while the alarm is sounding.
– Display: »
e
– The alarm (signal or radio) stops.
– The alarm goes on again at 5-minute intervals
(the total alarm time is 90 minutes).
Cancelling the alarm for the day
1 Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »
– The alarm (signal tone or radio) stops, but the
alarm function remains activated for the next
day at the set time.
Deactivating/activating alarm stand-
by
«
1 To deactivate alarm stand-by, press »ALARM«
until » « or »
e
play.
– Display: »
e
– The set alarm time is saved.
«
2 To activate alarm stand-by, press »ALARM«
until again.
« or » «.
§
« or » « flashes.
§
« or »
e
« no longer appear in the dis-
§
« or » « disappears.
§
ENGLISH
«.
§
17