Zanussi ZRB936PW2 Manual De Instrucciones página 26

rate earth in compliance with current regula-
tions, consulting a qualified electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Direc-
tives.
Door reversibility
Warning! Before carrying out any
operations, remove the plug from the
power socket.
Important! To carry out the following
operations, we suggest that another person will
keep a firm hold on the appliance doors during
the door reversing procedure.
Middle Hinge
• Open the doors. Unscrew the middle hinge
(B). Remove the plastic spacer (A).
• Remove the spacer (F) and move it to the
other side of the hinge pivot (E).
• Remove the doors.
• Remove the middle hinge cover pins (C,D)
and move them to the opposite side.
• Fit the middle hinge pin (E) into the left-hand
hole of the lower door.
A
B
E
F
C D
Bottom Hinge
• Unscrew the lower hinge (A)
• Remove the left-hand cover pins (D) and
move them to the opposite side.
• Re-screw the lower hinge (A) on the opposite
side.
• Unscrew the lower hinge pivot (B) and
spacer (C), and place them on the opposite
side.
26
All manuals and user guides at all-guides.com
Doors
• Remove the plugs (A) on the top side of both
• Re-insert the bottom door on the bottom
• Insert the middle hinge (B) into the left hole
Top Hinge
• Unscrew the top hinge pivot (1) and place it
• Fit the top door on the top door pivot, and
• Re-insert the middle hinge pivot (B) into
C
B
A
D
doors and move them to the opposite side.
hinge pivot (B).
of the bottom door.
A
on the opposite side (2).
2
1
bottom door on the bottom hinge pivot.
bottom and top door pivot holes, slightly tilt-
ing both doors.
www.zanussi.com