Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-3005
  6. Instrucciones de instalación

Metra 95-3005 Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Cutting template
A
Metra. The World's Best Kits.
®
Chevrolet Astro/GMC Safari
Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DDIN radio provision
B
MetraOnline.com
1995-2005
for more detailed information about the product and up-to-date vehicle
C
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
95-3005
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1858
Antenna Adapter: 40-GM10
Pocket: 88-00-3302
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool • Scribe tool
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 7/14/21 INST95-3005

Publicidad

loading

Manuales relacionados para Metra 95-3005

Resumen de contenidos para Metra 95-3005

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3005...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY KIT PREPARATION 1. Engage the parking brake, then place 1. Place the cut template over the the gear selector in the lowest position. dashboard trim panel. (Figure A) 2. Unclip, unplug, and remove the 2. Using a scribe tool, score the area in the dashboard trim panel.

  • Página 3: Kit Assembly

    2. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 3. Clip the radio assembly into the dash.
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3005...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3005...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO PREPARACIÓN DEL KIT 1. Active el freno de mano. 1. Coloque la plantilla de corte sobre la Posteriormente, coloque el selector de moldura de corte del tablero. (Figura A) velocidades en la velocidad más baja. 2. Con el punzón, marque el área en la 2.

  • Página 7: Ensamble Del Kit

    Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de Axxess. Pruebe el radio para asegurarse de que funciona bien. 3. Monte el ensamble del radio en el tablero.
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3005...