Operation - GGP ITALY MT48Li Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
5
EN
ATTACHING GRASS DEFLECTOR
See Figure 2.
WARNING
The line cut-off blade on the grass deflector is sharp
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.

6. OPERATION

WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear eye protection. Failure to do so could
result in objects being thrown into your eyes resulting
in possible serious injury.
WARNING
Never use blades, flailing devices, wire, or rope on
this product. Do not use any attachments or
accessories not recommended by the manufacturer
of this product. The use of attachments or
accessories not recommended can result in serious
personal injury.
For complete charging instructions, refer to the
Operator's Manuals for your battery pack and charger
models.
Note: to avoid serious personal injury, always remove the
battery pack and keep hands clear of the lock-out button
whtn carrying or transporting the tool.
TO INSTALL BATTERY PACK See Figure 3.
■ Place the battery pack in the trimmer. Align raised
ribs on battery pack with grooves in the trimmer's
battery port.
■ Make sure the latch on bottom of the battery
pack snaps in place and that battery pack is fully
seated and secure in the trimmer before beginning
operation.
TO REMOVE BATTERY PACK See Figure 3.
■ Release the variable speed control trigger to stop
the trimmer.
■ Press and hold the battery latch button at the bottom
of the battery pack.
■ Remove battery pack from the trimmer.
■ Remove the battery pack.
■ Invert the grass trimmer/edger to access the trimmer
head.
■ Using a Phillips head screwdriver, remove the
preinstalled screw (1) from the trimmer head.
■ Place the guard (2) on to the trimmer head.
■ Align the screw hole on the guard with the screw
hole on the trimmer head.
■ Insert the screw into the trimmer head, fastening the
guard in place.
SHAFT ASSEMBLY See Figure 4.
The shaft's length cannot be adjusted.
■ Insert the lower shaft into the shaft coupler on the
upper shaft.
■ Tighten the coupler by turning clockwise. Make
sure the upper and lower part of shafts are securely
tightened before reinstalling the battery pack.
STARTING/STOPPING THE TRIMMER See Figure 5.
■ To start the trimmer, grip the front handle with one
hand while holding the rear handle with your other
hand making sure to depress the lock-out trigger
while squeezing the variable speed trigger.
■ To stop the trimmer, just release the variable speed
control trigger.
OPERATING THE TRIMMER See Figure 6.
Follow these tips when using the trimmer:
■ Hold the trimmer with your right hand on the rear
handle and your left hand on the front handle.
■ Keep a firm grip with both hands while in operation.
■ Trimmer should be held at a comfortable position
with the rear handle about hip height.
■ Cut tall grass from the top down. This will prevent
grass from wrapping around the shaft housing
and string head which may cause damage from
overheating.
If grass becomes wrapped around the string head:
■ Remove the battery pack from the trimmer.
■ Remove the grass.
Contact with the trimmer cutting head while operating
can result in serious personal injury.
CUTTING TIPS See Figure 8
■ Keep the trimmer tilted toward the area being cut; this
is the best cutting area.
■ The trimmer will cut better when moved from left to
right across the area to be cut; it is less effective when
OPERATION
WARNING

Publicidad

Tabla de contenido
loading

Tabla de contenido