a. Slide the radio into the charger pocket and aligning to the
groove on each side of the radio with the corresponding
raised rail on each side of the charger pocket.
b. Ensure complete contact between the charger and radio
contacts.
c. Charger indicator will blink green once to indicate a
successful radio docked.
d. See radio display for charging status.
e. To remove a radio from the charger, use two hands to
remove a radio from the charger pocket - one hand to hold
and support the charger, and the other hand to remove the
radio.
Figure 2: Slotting the radio into the charger for charging
5