EN
62
ERROR mODE / POWER FAIl RECOVERY / DEFAUlT DRYER SETTINGS
ERROR MODE
Meaning of Error Codes that LED displays during occurrence or
problem.
Dryer error code
PROBLEM
It is displayed when thermistor is opened or
shorted
ELECTRIC TYPE
It is displayed when thermistor temperature
have increased about 5 degrees for 3 seconds
GAS TYPE
It is displayed when thermistor temperature
have increased about 17 degrees for 10
seconds
Disconnection of card reader wire.
POWER FAIL RECOVERY
In case of power failure the machine stops running but the time display remains on, showing the time just before
power failure.
Press the START button after the power is restored, then the machine will restart.
DEFAULT DRYER SETTINGS
Default Settings
Cycle Time (Minutes)
Cool Down Time Cycle
High Temperature
Medium Temperature
Low Temperature
Top Off Time (Minutes per coin)
Coin #1 Value
Minutes/Minutes and seconds
Fahrenheit/Celsius
Error Mode
NOTE
• Price setting varies by country.
• Set your country from
• After EEPT, reset your country. (Default country is England)
POSSIBLE CAUSE
mode. (Refer How to enter the
SOLUTION
Thermistor should be replaced.
Thermistor should be replaced.
Check the card reader wire.
Default
50 Minutes
2 Minutes
154,4° F (68° C)
140° F (60° C)
ELECTRIC TYPE 125,6° F (52° C)
GAS TYPE 116,6° F (47° C)
10 Minutes
0,10
Minutes
Celsius
On
)