Installation
WARNING
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether the appliance is
properly grounded.
• Properly ground dryer to conform with all governing codes and
ordinances. Follow details in the installation instructions. Electric
shock can result if the dryer is not properly grounded.
• Before use, the dryer must be properly installed as described in this
manual.
• Installation and service must be performed by a qualified installer,
service agency, or the gas supplier.
• Do not repair or replace any part of the dryer or attempt any servicing
unless specifically recommended in this Owner's Manual or in
published user-repair instructions that you understand and have the
skills to carry out.
• Do not tamper with controls.
• Do not install or store the dryer where it will be exposed to the
weather.
• Adequate ventilation has to be provided to avoid the back flow of
gases into the room from appliances burning other fuels, including
open fires.
• Install and store the dryer where it will not be exposed to
temperatures below freezing or exposed to the weather.
• To reduce the risk of electric shock, do not install the dryer in humid
spaces. Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• Connect to a properly rated, protected, and sized power circuit to
avoid electrical overload. Improper power circuit can melt, creating
electric shock and/or fire hazard.
• Remove all packing items and dispose of all shipping materials
properly. Failure to do so can result in death, explosion, fire, or burns.
• Place dryer at least 18 in. above the floor for a garage installation.
Failure to do so can result in death, explosion, fire, or burns.
ImPORTANT SAFETY INSTRUCTIONS
9
EN