Programming The Guest Mode; Taking Weight Measurement Only; Switching The Weight Mode - Tanita InnerScan V Manual De Instrucciones

PROGRAMMING THE GUEST MODE

Guest mode allows you to programme the unit for a one-time use without resetting
a Personal data number.
Press /OFF or [GUEST] and step on to the platform holding the hand-electrodes.
Press GUEST to start measurement.
After the measurement, the unit will beep once, and now step off the plat form. To
obtain your readings, input your personal information such as Age, Sex, Height,
and Activity Level. Please see page 4 for more details.

TAKING WEIGHT MEASUREMENT ONLY

Select Weight-Only Key
Press /OFF . After 2 or 3 seconds, "0.0" will appear in the display and the unit will
beep. When "0.0" appears in the display, step onto the platform. The body weight
value will appear. The power will then shut down automatically.

SWITCHING THE WEIGHT MODE

You can switch the unit indication by using the switch on the back of the hand-electrodes (kg/lb/st lb).
Note: For use only with models containing the weight
mode switch.
10