LaserLiner SuperSquare-Laser 4 Manual De Instrucciones página 6

Ocultar thumbs Ver también para SuperSquare-Laser 4:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Read the operating instructions and the enclosed
brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain.
This document must be kept in a safe place and
if the laser device is passed on, this document
must be passed on with it.
90° line Laser
– The 4 clearly visible laser lines are ideally suited for
aligning tiles.
– Vertical and horizontal levelling on walls
– The applied lay edges and contact surface make it easy
to position floor tiles.
– Clean application on all surfaces – also when using pins
– Bubble levels to adjust the device
– Angle accuracy: ± 0,5 mm / 1 m
General safety instructions
– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
– Do not expose the device to mechanical stress,
extreme temperatures, moisture or significant vibration.
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
06
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN60825-1:2007-10

Publicidad

Tabla de contenido
loading

Tabla de contenido