Technical Specifications; Legal Information - Trust SMART Home AYCT-102 Manual Del Usuario

Ocultar thumbs Ver también para SMART Home AYCT-102:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
AYCT-102 REMOTE CONTROL
EN
Read these simple guidelines. Not following them may be dangerous and faulty installation will
invalidate any warranty that may apply to this product.
COMPATIBILITY
This transmitter works with all Trust Smart Home
receivers.

TECHNICAL SPECIFICATIONS

• Battery
1x 3 V CR2032 lithium
• RF frequency
433.92 MHz
• RF range
Up to 30 m indoor/70 m outdoor (optimal conditions)
• Channels
16 + Group on/off
REMARKS
• Every Trust Smart Home dimmer has a different dimming speed. If possible, use seperate channels
for each dimmer receiver to avoid non-simultaneous dimming.
• The
button (group function) can only be used to switch receivers on/off. To control dimmer
receivers, use channel 1-16 instead.
WIRELESS RADIO SIGNAL
• The 433.92 MHz radio signal passes through walls, windows and doors.
• Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimal conditions)
• The range is strongly dependent on local conditions, such as the presence of metals. For example,
the thin metal coating in Low-emissivity (Low-E) glass has a negative impact on the range of
radio signals.
• There may be restrictions on the use of this device outside the EU. If applicable, check whether this
device complies with local directives.

LEGAL INFORMATION

CE: Trust declares this device complies with the Directives as listed in Section 2 of this document.
WEEE: Dispose of the device at a recycling centre. More information: www.trust.com
Warranty information: www.trust.com/warranty
1
FUNCTIONALITY
On/off, group function, dim function (only if the
receiver is a dimmer) and up/down/stop (electric
screens receiver only)

Publicidad

Tabla de contenido
loading

Tabla de contenido