Safety Notes; Intended Use; Safety Labels On The Devices - DeWalt DDF5110500 Traducido De Las Instrucciones Originales

English
1

Safety Notes

Please read the safety information
carefully in order to ensure a safe and
proper operation of the device. Retain
the operating instructions until the
product is disposed of.

1.1 Intended Use

The Gas Nailer has to be used in accordance
with the speci¿ cations of this instruction
manual. Gas Nailers are not „toys" and require
prudent, responsible and careful handling. The
Gas Nailer may only be used by persons over
the age of 18 or trainees over the age of 16 in
the presence of a responsible supervisor. They
must not be under the inÀ uence of fatigue,
alcohol, medication or drugs.
Suitable materials to use as a base, for example
– Concrete of normal strength
– Steel
Materials that are unsuitable and should not be
used as a base, for example:
– Materials that are too soft or too thin
– Materials that are too brittle, such as glass
or ceramic
– Materials that are too hard, such as
hardened steel
– Hollow block masonry
– Cast iron, plastic, marble, gypsum
plasterboards
Misapplications, misuse or „fooling around"
may cause lethal injuries and serious property
damage. This particularly includes
– The overriding of safety mechanisms
– Misusing the device as a „¿ rearm"
– Misusing the device as a hammer or similar
tool
Only use those gas cartridges, charging devices
and batteries made by the manufacturer of the
Gas Nailer and only use nails approved by the
manufacturer, for more information, see chapter
6 „Technical Data".
Other applications and uses as well as
modi¿ cations to the device, additions to the
device or conversions as well as maintenance
operations and repairs performed by yourself
can impair the safety, reliability and proper
36
functioning of the device to a signi¿ cant extent
and void any warranty claims.

1.2 Safety Labels on the Devices

The device may only be used if all safety labels
on the device are both complete and legible.
The production number is indicated in the lower
portion of the handle, such as 098226035D.
The ¿ rst two digits represent the year of
manufacture.
Gas Nailer (Magazine):
Permissible nails:
Ø 2.6 mm – 3.7 mm
Length: 15 mm – 40 mm
Read the instruction manual prior to
using the device
Wear safety goggles
Wear hearing protection
Only use the Gas Nailer in
well-ventilated areas
Do not use the Gas Nailer in the rain
Smoking forbidden
Keep the Gas Nailer away from
children
Never point the Gas Nailer at other
persons
Keep the ventilation openings free.
Do not cover them with your hands
Never hold your hand or other body
parts under the barrel.
Only use the Gas Nailer up to an
ambient temperature of 40 °C