(2) Format the micro SD memory
Format the Micro SD card Please select a high-speed Micro SD card only and format it on FOOLISH before recording any
video and voice or shooting any photo. If the Micro SD card has ever been used on other devices, please format it on
FOOLISH before any operation for normal usage.
Note:
Please confirm whether files in internal memory of FOOLISH and in Micro SD card are needed before operating ;
* Locked files of FOOLISH also can be formatted to remove;
(3) Set the date/time
In preview mode, press " M" key to enter the menu interface, press ">"key to shift to the setup interface "
"-"to select the menu "Date/Time", and then press "OK" key to enter the setup interface of "Date/Time", (Note: To press
"M" key can exit from the setup interface).
Settings
The yellow number indicates the current cursor position. To press " <" or ">" key can move the cursor and select date or
time, Press "OK" key to confirm, and this number will turn red and value of date or time can be changed. Then press "OK"
key again to finish; Finally, move the cursor to "
Parameter Settings
In preview mode, press "M" key to enter the menu interface, press "<" or ">" key to move the cursor left and right, and
press "+" or"-" key to move the cursor up and down. After selecting the menu, press "OK" key to set the selected menu
and to press "M" key again can exit..
(1) Setting of camera parameter:
a.
Video image resolution: Select 1080P,960P,720P, WVGA or QVGA;
(720P/960P mode do not contain the setup options of 1080P mode and 1080P modle have no the QVGA mode)
b.
Bit Rate: the sampling rate in transforming image into digital signals at the time of video recording.
Clear image requires high bit rate and large file size at the same time.
c.
Laser synchronous shooting: Turn on or turn off the laser transmitter;
d.
Shooting mode: Select video recording "
Note::
a.
Under the voice recording mode, Press "Record" key once, the system starts recording, voice recording duration is
displayed on the bottom of TFT display screen and the green indicator twinkles slowly; if press "Record" key again, the
system will stop and save the current audio file recorded, the green indicator is off and the red indicator remains
bright (the corresponding operating prompt is on LCD segment screen), and it returns to the preview mode.
b. The voice recording process only responds to operations of "Record", "Shutdown" and "VOX Switch" key; if turn on
" key and press "OK" key to confirm date or time changed.
"or voice recording "
~ 9 ~
" ;
", press key