Nilox FOOLISH Manual De Instrucciones página 39

Ocultar thumbs Ver también para FOOLISH:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
9.
AV output connection:
In preview state, connect FOOLISH with the display device with AV cable, and then all functions of FOOLISH can be
operated.
Note:
After connecting with audio and video display device, TFT screen on FOOLISH and the voice will be turned off, and the
audio and video will be displayed on the display device. LCD segment screen on FOOLISH will display the corresponding
function operations normally.
10. HDMI output connection: In preview state, connect FOOLISH with the high-definition display device with HDMI
cable, and then functions of 5D19 can be operated; however, digital zoom function cannot be operated in720P/1080P
mode;
Note:
a.
After connecting with HDMI display device, TFT screen on FOOLISH and the voice will be turned off, and the audio
and video will be displayed on the display device;
b.
FOOLISH may be in abnormal state if the HDMI cable is inserted or unplugged improperly when connecting. It can
be recovered after re-starting and LCD segment screen will display the corresponding function operations normally.
11. USB connection:
a.
When there is no preset battery in FOOLISH , use USB power adapter to connect with FOOLISH , all functions can
be operated (meanwhile, LCD segment screen and TFT display screen will display the corresponding operation
prompts);
b.
ln startup state, use USB cable to connect with the computer, data stored in FOOLISH memory and the Micro SD
card can be read (at this time, LCD segment screen will display the USB connection state icon);
c.
FOOLISH may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting, and
re-start to recover.
12. Prompt of key tone:
a.
Press "Record" or "Shutter" key once in normal using, FOOLISH will tick once to indicate the effective
operation;
b.
When stopping video recording, FOOLISH will tick twice;
c.
FOOLISH will tick twice to indicate the successful code pairing;
d.
Press "Shutter" key in video recording, FOOLISH will not give prompt;
e.
When operating on TFT display screen, press "Menu" key in preview state, press ">" or "<" key to enter
the menu "Setup", press"+" or"-" key to select the menu "Key Tone", and then you can turn on or turn off the key
tone;
f.
If the system is in video recording, press "Stop" key on the remote control once, FOOLISH will tick twice
to indicate the video recording stopping;
g.
lf the system is in video recording, press "Shutter" key on the remote control once, FOOLISH and horn on
TFT display screen will not give any prompt;
h.
Press any key on the remote control in standby state, FOOLISH will tick once to wake up the main system.
13. Prompt of laser light
a.
After starting up, long press "Record" key for 3s in any state, the system will lighten the laser light;
~ 16 ~

Publicidad

Tabla de contenido
loading

Tabla de contenido