Cleaning Fuel Strainer; Inspect Muffler And Spark Arrester - Firman P08004 El Manual Del Propietario

A- Spark plug
B- Spark plug cap
( c) Inspect spark plug for damage and clean
with a wire brush before reinstalling (d) Adjust the
electrode gap to 0.7 to 0.8 mm
(0.028" to 0.031").
(e) Seat spark plug in position and thread by hand
to prevent cross threading. (f) Tighten plug with
provided wrench and put the cap back on spark
plug.
SPARK PLUG: TORCH F6RTC
NGK BPR6ES
CHAMPION RN9YC or equivalent.

Cleaning Fuel Strainer

Dirt and water in the fuel are removed by the fuel
strainer.
English
19
(a) Remove the strainer cup and throw away
water and dirt.
(b) Clean the screen and strainer cup with
gasoline.
(c) Tightly fasten the cup to main body,
making sure to avoid fuel leak.

Inspect Muffler and Spark Arrester

Inspect the muffler for cracks, corrosion, or other
damage. Remove the spark arrester, if equipped,
and inspect for damage or carbon blockage. If
replacement parts are required, make sure to use
only original equipment replacement parts.
WARNING
Exhaust heat/gases could ignite combustibles,
structures or damage fuel tank causing a fire,
resulting in death or serious injury and/or property.
Contact with muffler area could cause burns
resulting in serious injury.
Customer Service: 1-844-FIRMAN1Page